Introduction of Dry Mortar Production Line:
Dry mortar production line (or dry mortar machine) is a set of machinery that produces dry mortar (also known as dry premixed mortar or hydraulicity cement mortar) for construction industry and other uses.
Main Equipment of Dry Mortar Production Line:
It is mainly composed of screw conveyor, mixer machine, hopper, automatic measuring packing machine, electric control cabinet, dust catcher (Can be selected according to the requirements of the customer).
Performance Characteristics of Dry Mortar Production Line:
--- Reasonable Design,
--- Excellent Performance,
--- Simple Operation,
--- Less Labour needed, 2-3 workers is ok,
--- Less investment, less land occupation and higher output Capacity.
Application of Dry Mortar Production Line:
This equipment can produce all kinds of dry powder mortar, various adhesive mortar, plaster mortar, mortar king, inside and outside wall putty powder, wall brushing plaster, etc.
Working Principle of Dry Mortar Production Line:
To add the material into the hopper of screw conveyor separately. Firstly add cement, cellulose and other additive material into mixing machine through screw conveyor, then mix them for about 3 minutes, after that add the sand into the mixing machine, then together mix about 5 minutes.
After that, through the outlet screw conveyor, takes out the dry mortar product, then sends it into Hopper. Through hopper the product dry mortar goes into powder packing machine, and to be packed into bags as need.
Specification of Dry Mortar Production Line:
Model
Motor Power
Processing Ability
Daily Output Capacity
Dimension (cm)
G40
17.5 kw
1000 KG
20-30 Tons
650x320x320
G50
25 kw
2000 KG
35-45 Tons
700x350x340
G60
24 kw
1000 KG
20-30 Tons
650x320x320
G70
28 kw
2000 KG
40-50 Tons
700x320x320
G80
27.2 kw
2000 KG
50-60 Tons
450x450x340
G90
25 kw
2500 KG
60-80 Tons
450x450x600
G100A
50 kw
2500 KG
80-100 Tons
900x450x800
G100B
55KW
3500 KG
90-120 Tons
900x500x850
1. installation: determine the installation position of the mixer and then install the feeder, the discharging machine, the storage bin and the packing machine in turn. The power supply is 380V, 50HZ's three-phase alternating current, the control box is set up the total switch, the electric leakage protector is equipped, and the electric power line of the motor is used with the national standard cable.
2. before the use of the equipment need to add oil (planetary gear reducer to add oil), and then carry out unloaded operation, check whether the firmware is loose, electric is normal, machinery is running normal, such as abnormal. Repair and debug.
3. opening sequence: mixer - feed machine - feed machine - packing machine, feeding volume can not exceed the specified volume, when the feeding mixer can not stop, found abnormal in the way, must stop inspection immediately.
4. charging sequence: Cement (powder), additive (fiber), quartz sand (aggregate).
5. before working, the materials in the mixer or charging hopper must be discharged to prevent the material from hardening during the second day production and affect the normal production.
If you are in need of Dry Mortar Production Line, please contact us by:
◆ Email: suncomachinery@hotmail.com
◆ Mobile: +86-15838214261
◆ Skype: cliff-qin