国产精品亚洲а∨天堂

    <code id="nihhs"></code>
  1. <code id="nihhs"><em id="nihhs"></em></code>

    1. drying machine
      Welcome to Sunco Machinery  |  Site Map  |  Contact us

      PRODUCT CENTER

      You are here: Home > products >> Crushing Machine
      Hammer Crusher, Hammer Breaker, Hammer Mill, Hammer Shredder

      Hammer Crusher

      Hammer Crusher(Hammer Mill) crushes materials by the collisions between the high-speed hammer and materials. Hammer Crusher(Hammer Mill)were developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries.
      service hotline
      Details

      Overview of Hammer Crusher (Hammer Mill):

      Hammer Crusher (Hammer Mill) is widely used in breaking and crushing various soft and hard ore whose compression strength is not higher than 320MPa (MPa), such as coal, salt, chalk, gypsum, blocks, limestone, etc.

      The main working parts of Hammer Crusher (Hammer Mill) is rotors with hammers. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. 

      Hammer Crusher, Hammer Breaker, Hammer Mill, Hammer Shredder

      Features of Hammer Crusher (Hammer Mill) :
      01. High production and high crushing ratio ;
      02. Low power consumption, even particle size, and the discharging size can be less than 3mm ;
      03. Simple & compact structure ;
      04. Low investment cost, easy maintenance ;
      05. After crushing, the powder material is less than 20% .

      Working Principle of Hammer Crusher (Hammer Mill) :

      The motor drives the rotor to rotate at a high speed through the belt, and on the rotor there are series of hammers. When the materials get into the working area of hammers, the rotating hammers with high rotation speed will crush them, the crushed products meeting the required size can be discharged by the outlet and become the final products, the large size products are brought back to the crushing area to be crushed again by the hammers until they reached the required size.

      Structure of Hammer Crusher (Hammer Mill)

       

      Technical Data of Hammer Crusher (Hammer Mill) :

      Model 

      Feed 

      Opening 

      Size

       (mm)

      Max. 

      Feeding 

      Size

       (mm)

      Discharging 

      Size

       (mm)

      Capacity 

      (t/h)

      Motor

       Power 

      (kw)

      Weight 

      (t)

      Overall 

      Dimension 

      (L×W×H) 

      (mm)

      PC400×300

      145×450

      100

      0-30

      3-5

      5.5

      0.45

      844×942×878

      PC600×400

      295×450

      100

      0-35

      10-12

      18.5

      1.03

      1054×972×1117

      PC600×600

      295×570

      100

      0-35

      12-18

      45

      2.14

      1315×840×1501

      PC800×600

      350×570

      120

      0-45

      20-25

      55

      2.45

      1515×2586×1040

      Notice: Any change of Hammer Crusher (Hammer Mill) technical data shall not be advised additionally.

      Inquiry
      Note: Please feel free to give your inquiry in the form below. We will reply you with details within 24 hours!
      Topic: *
      Company:
      Name: *
      Tel: *
      E-mail: *
      Message:
       
      国产精品亚洲а∨天堂

        <code id="nihhs"></code>
      1. <code id="nihhs"><em id="nihhs"></em></code>