Sand Dryer Brief Description:
◆ Sand Dryer is widely used in construction materials, ore dressing, metallurgy, chemical industry, cement industry, etc.
◆ Sand Dryer are used for drying all kinds of sand such as river sand, yellow sand, silica sand, quartz sand, pomegranate sand, etc. Sand Dryer mainly consist of rotary drum, carrier roller, lifting boards, hot air furnace, electric control box, etc.
◆ New type rotary drum dryer, the flights structure in the cylinder of sand dryer is more advanced ;
◆ Inner temperature is 450℃-700℃, discharging temperature <= 60 ℃, can send into storage room directly, and no need cool device;
◆ Made of wear resistant manganese plate, 3 to 4 times more hardwearing than ordinary steel plate ;
◆ 1/3 of the traditional drum dryer's coal consumption, electricity power saving 40%, standard coal consumption per ton dried sand < 16 kg.
Wet Sand Input Dried Sand Output
Sand Dryer Workflow:
◆ Belt Conveyor or bucket elevator transports the wet sand into the hopper which is on the top of sand dryer.
◆ Hot air furnace supply the hot air for the sand dryer.
◆ Inside the sand dryer's cylinder, there are many flights, and these flights mix the wet sand and hot air sufficiently. The humidity in the wet sand is heated and evaporated into water vapour.
◆ At the end of the sand drying plant, there is one high pressure draft fan. Under the function of draft fan, the water vapour goes out of sand dryer in time.
◆ During the sand drying process, there is some dust mixed with the water vapour. In the cyclone separator, the dust is separated from the water vapour, and falls down.
◆ The dried sand goes out of the sand dryer machine from the outlet as product.
◆ Finally we can use one belt conveyor or bucket elevator to send the dry sand into silo or trucks.
Fuel for Sand Dryer:
Fuel for the heat source can be wood pellets, waste wood, coal, diesel, natural gas, biomass fuel, etc. The users can choose the most suitable fuel according the actual situation such as fuel available, fuel cost, local environment laws, etc.
Partial Technical Data of Sand Dryer Machine:
Model Processing Capacity Input Moisture Output Moisture Main Motor for Sand Dryer Coal Calorific Value Feedinlet Temperature ?1.5X14M 10-12 17-23% <10% 15 >5500 KCAL/KG 700±50℃ ?1.8X14M 15-18 17-23% <10% 18.5 >5500 KCAL/KG 700±50℃ ?2.0X16M 20-25 17-23% <10% 18.5 >5500 KCAL/KG 700±50℃ ?2.2X18M 25-30 17-23% <10% 22 >5500 KCAL/KG 700±50℃
Notice: Any change of Sand Dryer technical data shall not be advised additionally.
Sunco Machinery can design and supply the Sand Dryer system according to the following information specially :
01. Initial moisture content (%)of wet sand ?
02. Final output moisture content (%) of dry sand needed ?
03. Input Capacity (ton per hour ) needed ?
04. Prefered fuel such as coal, waste wood, diesel, or natural gas, etc ?
05. Other special requirements if have ?
For detail and price of Sand Dryer, please refer to:
◆ Email: suncomachinery@hotmail.com
◆ Mobile / WhatsApp: +86-15838214261
◆ Video: https://www.youtube.com/watch?v=hRbrEjSZFaA
https://www.youtube.com/watch?v=IMF2nE7eAes
https://www.youtube.com/watch?v=u1dgBh-JktI
https://www.youtube.com/watch?v=eQ-4iNnxekw
https://www.youtube.com/watch?v=4RrghfR9PV4
https://www.youtube.com/watch?v=3OkF8nPLuoQ